C01 Band Link
Adjustment
Guide
Learn how to remove or install links on your C01 watch band. Follow the video tutorial and step-by-step guide to fine-tune the fit with a cleaner, more secure adjustment.
Before You Start
Prepare the band and adjustment tool before removing links. Work on a flat surface to avoid losing small pins or components.
Check the Fit
Wear the band first and estimate how many links need to be removed for a balanced fit.
Keep Both Sides Balanced
Remove links evenly from both sides whenever possible, so the clasp stays centered on your wrist.
Handle Pins Carefully
Small pins are easy to misplace. Place removed links and pins together during adjustment.
Adjustment Steps
Use the video as the main reference. The steps below help you quickly understand the full adjustment process.
Locate the Removable Links
Identify the links that can be removed. Check the inner side of the band and confirm the direction before pushing out the pin.
Push Out the Pin
Align the adjustment tool with the pin hole, then slowly push the pin out. Avoid forcing the tool at an angle.
Remove or Add Links
Take out the required number of links, or reconnect extra links if you need a larger fit.
Reinsert and Secure
Reconnect the band and insert the pin back into place. Make sure the link is locked firmly before wearing.
FAQ
Common questions users may have during C01 band link adjustment.
How many links should I remove?
Start with the smallest adjustment. If the band still feels loose, remove one additional link and test the fit again.
Should I remove links from one side or both sides?
For a more balanced wearing experience, remove links evenly from both sides when possible.
What should I do if the pin feels stuck?
Do not force it aggressively. Recheck the alignment of the tool and make sure you are pushing from the correct side.
Can I reinstall removed links later?
Yes. Keep the removed links and pins in a safe place so you can reinstall them if needed.
Need More Help?
If the band still does not fit correctly after adjustment, contact aulumu support with your order information and a short description of the issue.
Contact Support